A radon mitigation system pulls radon gas from beneath your home’s foundation and vents it outside above the roofline, before it can collect indoors. The most common type, called active soil depressurization, uses a sealed pipe and a quiet in-line fan. The EPA recommends fixing your home if a test shows radon at or above 4 picocuries per liter (pCi/L).
Why Radon Matters in the Southern Tier
Radon is a radioactive gas that forms naturally as uranium in soil and rock breaks down. You can’t see, smell, or taste it. It enters homes through cracks in foundations, sump pits, floor drains, and gaps around pipes. The EPA identifies radon as the leading cause of lung cancer among nonsmokers in the United States.
Elevated radon levels are common in parts of New York’s Southern Tier. The only way to know your home’s level is to test.
Testing Comes First
- Short-term tests run for a few days and give a quick snapshot.
- Long-term tests run for 90 days or more and show your average level more accurately.
Test in the lowest lived-in level of the home. If a short-term test comes back at or above 4 pCi/L, follow up with a second test or move straight to mitigation, per EPA guidance. The EPA also suggests considering mitigation for levels between 2 and 4 pCi/L.
How Active Soil Depressurization Works
- A suction point is created. We drill a hole through the basement slab, or connect to the sump pit, and remove some soil to create a small open area beneath the floor.
- A vent pipe is installed. PVC pipe runs from the suction point up and out of the house.
- A fan pulls the gas out. An in-line fan, mounted outside or in the attic, creates suction under the slab and draws radon into the pipe.
- Radon is released above the roof. The gas exits above the roofline, where it disperses.
- Cracks are sealed. Sealing major cracks and openings helps the system work.
- A manometer is added. This simple gauge on the pipe shows the system is running.
Homes with crawl spaces usually get a sealed plastic barrier over the soil, with the vent system drawing from underneath it.
After Installation
- Retest within a few weeks to confirm the levels dropped.
- Check the manometer regularly. If the liquid levels are even, the fan may have stopped.
- Retest every couple of years, and after major renovations.
Buying or Selling a Home
Radon testing is a common part of home inspections in the Binghamton area. If a test comes back high, a mitigation system can usually be installed and retested before closing.
Get Your Home Tested
Auchinachie Services has served Binghamton and the Southern Tier since 1906. Our team installs radon mitigation systems and retests to confirm they’re working, with upfront pricing before any work begins.